6" x 36" Chimney Pipe - Tristack pipe from White Metal Company

6" x 36" White Metal Brand Chimney Pipe Section

For help in completing your chimney system order you can go to this complete system page "complete system diagram and specifications" and/or use the following information.Options include:
Attic Insulation Shield
Pipe Shields
11" or deeper support boxes
Steep flashing
Double Wall interior pipe
Elbows for stovepipe

Chimney Installation Specifications and tips

This chimney pipe is 9" outside diameter and requires 2" of clearance to any combustible materials. It must rise thru the roof to a height that is 2' taller than the nearest surface within 10' horizontally, which is usually the ridge. The chimney is also required to extend at least 3' from the roofline. If the chimney extends over 4' from the roof surface then support bars are required to stabilize it. 1/2" thin walled conduit from a electrical or hardware store is often used. The chimney sits in a support box that is 14" square and attaches to the ceiling framing on all four sides by 3 screws or nails each. The 6WCS support box included here, has a trim attached to it and is designed for a finished level ceiling. If your ceiling has a slope or is unfinished then you need to order an 11" deep or deeper support box to hang into the room far enough for the connection to the interior stovepipe to be far enough away from the ceiling for safe clearances. Single wall stovepipe requires 18" clearance to combustibles and double wall pipe or single wall with pipe shields, require 6" clearance.

The standard pipe listed here is tested to 1700 degrees which was the only standard for class A chimneys up until the 2100 “HT” testing standard was established. Review your needs with your local building inspector or stove manufacturer to determine which pipe suits your needs

If you want help figuring our what parts you need and a specific quote for your system, send an email to us at info@woodheatstoves.com with your pipe size (6" or 8" ID), height from floor to ceiling, ceiling pitch/slope, roof pitch, zip code and height from ceiling to nearest ridge or surface within 10' horizontally. The chimney must rise 2' over the nearest object within 10'. We will send you a quote for this system cost delivered to your home.

This "Tristack" chimney system is from the White Metal company. It is triple wall air insulated chimney pipe tested to either 1700 degrees or 2100 degrees "HT" standards and both are available here.