6 inch ID x 29 inch to 46 inch Telescoping length black double wall interior stovepipe - also known as DVL pipe
Allows one-piece installation from stove to ceiling support box or finishing collar. This two piece pipe kit adjusts from 29 inch to 46 inches. You can also choose a longer and more common connector set that adjusts from 40 inch to 68 inches which is part number 8647. You can also purchase this same double wall pipe telescoping extensions or 6 or 12 inch adjustable lengths or 9, 12, 18 and 24 inch fixed lengths. This system is easy to install — no cutting required.
Make sure that you include a Close Clearance Connector - also known as DVL/DuraBlack Chimney Adaptor to connect this double wall pipe to your chimney system. This one part may need special attention if you are installing it to another brand of chimney system. The larger side of this connector needs to fit inside the hole in the support box with the inner liner of the chimney system inside of this connector. Sometimes the opening has to be slightly enlarged to get the connector to fit inside of the hole. Tapping the inner opening in the support box with a ball peen hammer or other tool can make the opening slightly larger for this to be done. This connector must be installed before the support box is installed in the ceiling to avoid dismantling to install this part.
Pipe shields can also be added to single wall stovepipe to get the same 6" clearances to combustible materials and are found by clicking here.
This product was added to our catalog on Thursday 08 May, 2008.
