Tag Archives: Advantage stoves

Identify your Whitfield pellet stove model here!

Posted on by
Reply


Use our helpful guides to identify your pellet stove, download your parts list and technical manuals, watch our instructional videos and repair your stove.

The first step in servicing or repairing any pellet stove is to identify the correct model so that you can get the correct owner’s and technical manuals and parts list. Here we offer you a video guide to identifying the Whitfield pellet stoves. You can click here to find photos and popular replacement parts listings for each Whitfield and many Quadrafire pellet stoves. Our web site also has the parts lists and manuals for these and many other brands of stoves. We have over 15,000 parts and product pages to help you in your stove installations, service and repairs.

You can click here to find photos of the Whitfield pellet stoves and some Quadrafire models along with popular replacement parts like auger motors, burn pots, blower and exhaust motors, firebricks and gaskets. We carry these pellet stove parts for a wide variety of manufacturers such as Whitfield, Quadrafire, Enviro, Hearthstone Stoves, Earth Stove and many others. To see all the pellet stoves we support visit our pellet stove parts section on our site. www.WoodHeatStoves.com

Whitfield Advantage II-T insert – Used

Posted on by
Reply

CLICK ON DIAGRAM TO ENLARGE.

Get this great deal on a pellet stove for under $1,000, while it lasts.
This is the Whitfield Advantage II-T insert. Serial # 43824 (surround panel dimensions 38″x36″)
This photo is similar but not identical to the stove being offered.

You can find this pellet stove insert for sale on our web site by clicking here.

Whitfield Advantage IIT Classic Auger Motor Service

Posted on by
Reply
Major Component Removal / Replacement
Auger Motor / Auger System Removal / Replacement / Test

Tools:
1/4″ socket w/ ratchet
Multimeter
7/16″ socket
Mirror
1/4″ Hex Allen Wrench
Flashlight
Power cord jumper w/ female spade receptacle clips

Spare Parts: Avail. at WoodHeatStoves.com

Earth Stove Auger Motor 6 RPM 15070

Auger Motor – PN 12046300

Gasket, End Plate – PN 61050003 Auger Kit – PN 12152202

Auger End Plate – PN 20950088 RTV (min. 500ºF) Pipe, replacement, if required

Steps- Identify set collar location. If re-positioning for access required, Power OFF. Use Power cord jumper to apply direct power to Auger Motor andposition set collar for access. Attach jumper to Motor before plugging into wall outlet.

Power Off / Disconnected after set collar positioning.

Steps: REMOVAL – AUGER MOTOR

1. Remove rear Inspection panel w/ ¼” socket & ratchet. Five (5) points.

2. Identify Set Collar position for access. Apply power jumper if needed.

Disconnect power, “OFF”, after step complete.

3. Remove wire leads from Auger Motor coil.

4. Loosen Lock Ring from Set collar w/ ¼” Hex Allen Wrench. Cup motor in hand while loosening Lock Ring.

REMOVAL – AUGER SYSTEM
5. EMPTY HOPPER.

6. Remove End Plate w/ 7/16″ socket & ratchet.

7. Remove Auger Shaft by pulling down and out. Take care to protect the End Plate Gasket.

8. Inspect Shaft and weld locations. Use the Flashlight and Mirror and inspect Auger Feed Tube for damage. Repair if required.

TESTING – AUGER MOTOR
9. Electrical test Ohm reading of motor coil.
10. Mechanical test Armature freedom of movement and “play.” Replace if required