Product Image
Item Name- Model Price
Earth Stove Pellet Stove Control Board This control panel works for all EARTHSTOVE Natural Fire Series pellet stoves except the NF2000 which takes part 38120 which is also available on our site. This board works for all of these Earth Stove pellet stoves MP35-50, HP 40, TP40, TP440, TP340,...
28M61-WHS-LX
$448.91
Rebuilding Service for any Earth Stove Pellet Stove Control Board The rebuilt control panel comes with a ONE year guarantee! This board works for all of these Earth Stove pellet stoves MP35-50, HP 40, TP40, TP440, TP340, WP50, FP60, MP240, MP40, all except the RP40 which was very rare and was a...
28M61-Rebuild
$250.00
Control Board for Whitfield Advantage II-T Cassic Advantage II-T Classic Pellet, Freestanding & Insert, WP2 MODEL YEARS: 2002 + (Serial # 75864 & up) Super ignitor for Whitfield stoves can be found HERE Control Boards are NOT returnable, please be sure you really need one before ordering!!
12055912-LX-WHS
$491.70
Whitfield Advantage II Control Board - Control panel This part was reproduced in limited quantity by the manufacturer and will be sold until gone and then may not be produced again. We also offer a rebuilding service for these older panels when out of stock which may be attempted if no longer...
25250801-LX-WHS
$495.00
This part fits this Whitfield pellet Stove: Advantage II (WP2) (SN: 7401-18144) This Board has a Black Face with 2 Knobs and a Red start button. This is a Re-Building Service that we offer. The price is $250. If your panel cannot be rebuilt $200 will be imediately refunded to cover the $50...
25250801-RB
$250.00
Before proceeding with rebuilding option make sure you know which control panel your stove serial number used by comparing to this chart and checking the back of the panel. The ICM single speed control board part number 13045900 IS AVAILABLE! Click here for that part. and was designed to function...
13056100-RB
$250.00
Prodigy I and II WP3 - ICM type Control Board For the following models: WW1/WP3 MODEL YEARS: 1990 - 1994 (Serial # 1001 to 2281) The ICM single speed control board part number 13045900 was designed to function with the Prodigy and Renaissance Pellet stoves that fall within the following serial...
13045900-LX
$583.80
Prodigy I and II WP3 Control Board Rebuild Service The ICM single speed control board part number 13045900 was designed to function with the Prodigy and Renaissance Pellet stoves that fall within the following serial range: PRODIGY 1001-2281 RENAISSANCE 1001-3607 The SSAC...
13045900-RB
$250.00
Fits Whitfield Pellet Stoves: Profile 30 FS (< Serial # 11904)Profile 30 FS-2 (> Serial # 11905)Profile 30 INS (< Serial # 11904)Profile 30 INS-2 (> Serial # 11905)Optima 3 FSOptima 3 INS For the Optima 2 you will need This Part: 16053941 Control Boards are NOT returnable, please be...
16052112-LX
$289.00
This control panel fits the Whitfield Quest pellet stove: Quest InsertQuest Freestanding Quest has OVAL hole in the drop chute 94-2000 WP4 The Quest Plus has the rectangular drop chute. Limited quantities are available and back ordering for extended periods has been common. Whitfield part 13645900...
13645900-WHS-LX
$434.50
This control panel is available new as of 10-09. This contorl board fits these Whitfield pellet stoves: Quest InsertQuest Freestanding Quest has OVAL hole in the drop chute 94-2000 WP4 Quest PLUS has Rectangle Hole in the drop chute 98-2000 WP4 This is a Re-Building Service that we offer. The...
13645900-RB
$250.00
TP300 NF2000I Control Board Rebuilding Service Fits Earth Stove Pellet Stove: TP300 (300-301-305-308) Fits Lennox Hearth Products Pellet Stoves: NF2000I This is a Earth Stove Feed System it is 2 Feed motors (Cup motor, Auger motor) This is a Re-Building Service that we offer. The price is $250...
38515H-RB
$250.00
These panels were also used for the Waterford Erin pellet stove after a certain serial number that we don't have those serial number ranges but panels say ICM or SSAC on the back on the largest component on the panel. This is the ICM single speed control board part number 13045900 was designed to...
13045900-LX
$583.00
Whitfield Profile 20fs FS2 Optima2 Control Panel Replacement control panel for Whitfield Profile 20 Freestanding, FS2 and Optima 2 Pellet stoves. Control Boards are NOT returnable, please be sure you really need one before ordering!!
16053941
$340.00
The manufacturer no longer makes these control boards but for a limited time we can supply factory refurbished units that have the same 1 year warrantee as the new units did originally. We also have a rebuilding service that can usually rebuild old control boards for $250 but it takes weeks to go...
17255912-R-LX
$324.50
This is the ICM single speed control board part number 13045900 was designed to function with the Prodigy and Renaissance Pellet stoves that fall within the following serial range: PRODIGY 1001-2281 RENAISSANCE 1001-3607 This is also the panel that was used by the earlier Waterford...
13045900-LX
$583.00
Winrich Control Board Rebuild Service The price is $250 which is paid when you check out.$50 is non refundable and is the cost for evaluation of your control panel. If your panel cannot be rebuilt successfully then $200 will be refunded.This process takes approximately 3 weeks to 2...
panelrebuild-API
$250.00
Circuit Board for Austroflamm Integra
B11786-EPP
$499.00
Ignitor Board for Austroflamm Integra Pellet Stove
109059-EPP
$192.00
Control Board for Austroflamm Wega Pellet Stove (Rebuild Service) The price is $250. If your panel cannot be rebuilt $200 will be imediately refrunded to cover the $50 evaluation fee due.1 Year WarrantyWait time approx 3 weeks to 2 months, depending on parts neededOur shipping is included in the...
R11581-EPP
$250.00
