THIS BURN POT IS NOT AVAILABLE FROM THE MANUFACTURER AT THIS TIME AND THERE IS NO INDICATION THAT THEY WILL OFFER IT AGAIN.
HERE IS ANOTHER ALTERNATIVE THAT CUSTOMERS HAVE USED OVER THE YEARS.
There have been many times when burn pots for earth stove pellet stoves were not available. We have suggested that owners bring their old burn pot to a welding/metal working shop to be reinforced or rebuilt. It is their only option for keeping the stove running and shouldn't cost too much from a competent shop which is located in most every community.
This burner/burn pot/fire pot is for these Earth Stove - Natural Fire Series pellet stoves:
TP40, TP40N, TP340/440, MP35/50, MP240, MP250, PI35, WP50 and HP40 Pellet stove Fire Pot / Burn Pot
Lennox - Earth Stove Part #15149 (NO FLAME SPREADER INCLUDED, AVAILABLE BELOW)
This part is rectangular with holes in the center slot and a square mounting hole where 1 to 3 screws or pins hold it in place.
This burn pot is different from the one originally on these stoves. We do not have the older version firepots available. There was a change around 1991. The front with air wash was lowered and log racks removed, etc.
When changing out a partially burnt out firepot, they will notice that there is less air with new firepot (because new firepot holes are not burnt out, thus less air). They may need to adjust draft fan shutter. They can also shim firepot up with washers under top mounting flange
Optional 15152-7 FLAME DEFLECTOR available for $28.00 HERE
This product was added to our catalog on Thursday 30 August, 2007.