Product 7/10
The Flame FP-45 is a user-friendly, high-heat producer. It's large hopper capacity and maximum heat output of 45,000 BTUs allow it to heat 500 to 2,000 square feet with ease. The user has a choice of six heat settings, thermostatic or manual control, noise level, and automatic or manual control of combustion air supply.Click here for the Owners Manual for the FP-45 Click Here for the FP-45 Brochure
Click here for the Tax Approval Certification, Save %30!!The dimensions of the steel FP-45 are 25.5" w x 28" d x 33" h. There is a full size ash drawer in the pedestal base. The unit may be vented with either 3" or 4" pellet vent. This model does have an automatic electronic ignition.!
Type of fuel
Pellets
Maximum recommended heating area
2,200 sq. ft.
BTU/H maximum
45,000
BTU/H minimum
8,200
Combustion autonomy on low
60 hours
Color
Metallic black
Exterior dimensions
25.5"W x 28"D x 33"H
Approved vent diameter
3" ou 4"
Loading capacity
80 lbs (36 kg)
Burn rate
1.3 to 5.5 lbs/hr.
Electrical consumption
2.5 Amps continuous duty
Electrical requirement
120 VAC - 60 hz - 15A
Choice of thermostatic or manual mode
Yes
Combustion technology
COMBEX
Number of intensity levels
6
Electronic igniter
Type of door
Glass with cast iron frame
Ash drawer
Minimum clearances (Sides)
6"
Minimum clearances (Back)
2"
Minimum clearances (Corners)
Mobile home approuved
Glass type
Ceramic glass
Glass surface
124 po. ca.
Weight
230 lbs (105 kg)
Warranty
Limited lifetime
Test standard - safety
ASTM-E1509, ULC S627-00, UL1482-98
Test standard - emissions
EPA Méthode 28
This product was added to our catalog on Friday 13 February, 2009.
CLICK HERE to Email for FAST and THOROUGH Responses!