Takagi T-K3SP Tankless Water Heater

Takagi T-K3SP Tankless Water Heater

Fully modulating, gas fired, tankless, on demand water heater with power-vented flue. Can be installed either indoors or outdoors, and used in either residential or commercial applications. Supplies hot water to: domestic hot water systems (directly or indirectly using water storage tanks), recirculation systems, hydronic heating systems, radiant floor heating systems, and/or combined domestic & heating applications, etc.

Safety Features:

• Built in Freeze Protection
• Manual Reset Hi Limit (Set at 194 degrees F)
• Overheat Cut Off Fuse
• Inlet, Outlet & Mixing Thermistors for Constant
• Temperature Monitoring
• Air Fuel Ratio Rod
• Flame Sensor

Specifications: DOWNLOAD THE SPEC SHEET CLICK HERE

Category III Required **Current numbers based on factory testing, 0.4 GPM Required for Continuous Fire After initial Ignition.
***Pressure Only Relief Valve Requires (Min. 200,000 BTUs. 150 PSI). Min 40 PSI or above recommended for maximum flow.
Warranty: 10 years Heat Exchanger, 5 years Parts (for Residential Use) - 3 years Heat Exchanger, 3 years Parts (for Commercial Use)