Whitfield Convection Blower factory original part - Whitfield part #12146109 - also know as 52L02 on some parts lists
This blower comes without a gasket. If you need a replacement gasket click here.
This blower is the factory original. We also have an aftermarket replacement which is the same or better qualilty and lower cost, available by clicking here.
Check carefully on this product page to make sure your motor is on the correct side of the blower assembly as some Advantage II models used the same blower as on the Advantage I and we do not have serial number for this transition available and want to be sure you get the right blower on the first attempt. Click here to see the blower somtimes used instead of the 12146109
The replacement Gasket is not included with the factory original replacement.
- Advantage II (WP2)
- Advantage II-T (WP2)
- Advantage III (WP2)
- Advantage II-T Classic (WP2)
- Optima 2 FS
- Optima 3 FS
- Optima 3 INS
- Advantage Plus FS
- Prodigy (WP3) (Serial # 1001-2281)
- Profile 20 FS ( < Serial # 7494
- Profile 20 FS-2 (> Serial # 7495)
- Profile 30 FS (< Serial # 11904)
- Profile 30 FS-2 (> Serial # 11905)
- Profile 30 INS (< Serial # 11904)
- Profile 30 INS-2 (> Serial # 11905)
- Quest Plus FS (WP4) (Rectangle Hole in Fireback)
- Quest Plus INS (WP4) (Rectangle Hole in Fireback
- T300P (P11) (T300P/T301P/T305P/T308P)
For the Older Whitfield Quest WP4 see This Blower
Lennox part #12146109 no gasket
old lennox part #90164121
PP7300-PSP gasket inc
11-1220-EPP no gasket 
This product was added to our catalog on Monday 30 November, 2009.
