Wood Heat Stoves & Solar — auger motor

Here is an educational video showing you the details of WHITFIELD AUGER MOTOR TROUBLESHOOTING AND REPAIRS! Replacing auger motors is the most common maintenance on any pellet stove. If you have a Whitfield pellet stove you must make sure to replace the original brass bushing with a NYLATRON BUSHING which is the factory required upgrade and has been for many years. They found that the brass bushing tends to cause resistance and bind over time and it actually wears out the auger motor. Auger motor warranty's are voided if the Nylatron bushing is not installed when a new auger motor...

The Auger motor is one of the most commonly replaced parts on any pellet stove. Go to this web page to find the most common replacement auger motors for all of these manufacturers, educational videos, owner's manuals and technical service manuals. You will find auger motors, and all of the other replacement parts, here for these popular brand names: Whitfield, Quadrafire, Austroflamm, Earth Stove, Traditions, Breckwell, Lopi, Avalon, Englander, Jamestown, Pellet Master, Harman, Dansons, St. Croix and more. http://www.optoiq.com/index/photonics-technologies-applications/lfw-display/lfw-article-display/216621/articles/laser-focus-world/volume-40/issue-11/features/optoelectronic-applications-entertainment/laser-light-shows-take-on-new-dimensions.html

Watch this video reviewing the troubleshooting and replacement of a Whitfield Advantage pellet stove auger motor. www.WoodHeatStoves.com You will find parts lists, owner's and technical manuals and all parts listed for Whitfield, Quadrafire, Enviro, Breckwell, Lopi, Avalon, Earth Stove, Traditions, Country, Austroflamm, Waterford, Englander and many other pellet stove brands. You can use the handy "Self Service Guide" to find any parts you need by going to this web page. http://woodheatstoves.com/index.php?main_page=page&id=31; We even have a video guide to finding parts listed on this you tube channel and in the informational video section. We have been selling and servicing wood, gas...

Question  My pellet stove is not feeding pellets. I have a question about my Erin Waterford Renaissance pellet stove. It was working great until this spring when the auger motor stopped dropping pellets. The auger motor still has a sound, but not the turning sound. Would this only be a auger problem or is there something else I need to look at before I order a new auger. Thanks for your help Debra, La Center WA Answer Response from Wood Heat - "Diagnose with deductive reasoning step by step" Hi Debra, I wish I could analyze all the possible reasons...

CASTILE PELLET STOVE SERVICE  FEED MOTOR TROUBLE-SHOOTING For a full list of Castile Parts,  click HERE for the service manuals, click Castile Insert  Castile FreeStanding Pellet stove service can be dangerous and complicated, use this information safely 1) TURN ON THERMOSTAT CIRCUIT AND MAKE SURE THAT THE CALL LIGHT IS ON 2) CHECK FOR POWER AT THE VACUUM SWITCH: A. IF NO POWER FROM RED WIRE-----CHECK CONTROL BOX OR WIRE HARNESS B. POWER ON RED BUT NO POWER ON ORANGE-----CHECK VACUUM SWITCH OR VENT SYSTEM 3) CHECK FOR POWER AT THE ORANGE WIRE ON THE #2 SNAP DISC: A. IF...