Wood Heat Stoves & Solar — pellet stoves

Whitfield Advantage II-T, III & II-T Classic - Fireback $110.00 This is a 3 piece Premium FireTekTM Fireback - Firebrick set Dimensions - Sides - 5 7/16" wide x 12-3/4" Tall, Back 8 5/16" wide x 12 3/4" tall This part is the ceramic fiber, brick appearance panel on the back wall of the firebox. This part is designed to fit these models: ADVANTAGE II , ADVANTAGE II-T MODEL YEARS: 1990 - 2000 (Serial # 18145 and up) Pellet, Freestanding and Insert, WP2 ADVANTAGE III MODEL YEARS: 1991 - 1996 (Serial # 18145 and up) Advantage II-T Classic Pellet, Freestanding...

Question  My pellet stove is not feeding pellets. I have a question about my Erin Waterford Renaissance pellet stove. It was working great until this spring when the auger motor stopped dropping pellets. The auger motor still has a sound, but not the turning sound. Would this only be a auger problem or is there something else I need to look at before I order a new auger. Thanks for your help Debra, La Center WA Answer Response from Wood Heat - "Diagnose with deductive reasoning step by step" Hi Debra, I wish I could analyze all the possible reasons...

CASTILE PELLET STOVE SERVICE  FEED MOTOR TROUBLE-SHOOTING For a full list of Castile Parts,  click HERE for the service manuals, click Castile Insert  Castile FreeStanding Pellet stove service can be dangerous and complicated, use this information safely 1) TURN ON THERMOSTAT CIRCUIT AND MAKE SURE THAT THE CALL LIGHT IS ON 2) CHECK FOR POWER AT THE VACUUM SWITCH: A. IF NO POWER FROM RED WIRE-----CHECK CONTROL BOX OR WIRE HARNESS B. POWER ON RED BUT NO POWER ON ORANGE-----CHECK VACUUM SWITCH OR VENT SYSTEM 3) CHECK FOR POWER AT THE ORANGE WIRE ON THE #2 SNAP DISC: A. IF...

Major Component Removal / Replacement Auger Motor / Auger System Removal / Replacement / Test Tools: 1/4" socket w/ ratchet Multimeter 7/16" socket Mirror 1/4" Hex Allen Wrench Flashlight Power cord jumper w/ female spade receptacle clips Spare Parts: Avail. at WoodHeatStoves.com Auger Motor - PN 12046300 Gasket, End Plate - PN 61050003 Auger Kit - PN 12152202 Auger End Plate - PN 20950088 RTV (min. 500ºF) Pipe, replacement, if required Steps- Identify set collar location. If re-positioning for access required, Power OFF. Use Power cord jumper to apply direct power to Auger Motor andposition set collar for access. Attach...

Earth Stove Pellet Stoves PELLET STOVE OPERATION & MAINTENANCE TIPS TO START-- Clean glass as needed with paper towel and woodstove glass cleaner. (Lay a piece of newspaper below the door to catch any debris.) 1. Fill hopper with pellets. (Pellets can be poured in from a pellet bucket in small quantities or the bag of pellets can be cut open right in the hopper to prevent spillage). 2. Turn up thermostat to DC 3. Pour 2 SCOOPS of pellets in to the burn pot (behind the large front log). It is not necessary to remove the logs. 4. Light...