Menu
Cart 0

Aftermarket Control Boards for Whitfield Pellet Stoves Renaissance & Prodigy I & II and Waterford Erin

Posted by 2 on

We have a Whitfield Renaissance & Prodigy and Waterford Erin Aftermarket Control Board available now that replaces either the SSAC control board or the ICM control board. 

You will receive the circuit board only and will need to mount it in the aluminum frame your old board is now installed in and reuse your existing knob. This circuit board has a 90 day warranty.
Whitfield Renaissance & Prodigy and Waterford Erin Control Board
This will work with pellet stoves that have the control panel to the right. Whitefield Renaissance & Prodigy and Waterford Erin Control Panel
This is a great addition to our line of control boards, since the SSAC control board and ICM versions are no longer available from the manufacturer since 2007. We also have a rebuilding service that may work for your panel too. The SSAC control board is distinguished by finding 4 small brass pins for wiring connection of wires to a component on the blower but this HALL effect blower wire is no longer used. When you receive this new circuit board or have your old panel rebuild, you will leave the wire from the SSAC unit unattached, the blower will work just fine because it will control it as the original ICM unit would. The SSAC control board (Whitfield/Lennox part#13056100) was used with the: - Renaissance serial Number 3608 and above - Prodigy with serial numbers 2283 and above - Waterford Erin pellet stove in later years with these Whitfield components. The factory part number 13045900 ICM single speed Whitfield Renaissance & Waterford Erin Control Board was designed to function with the Prodigy and Renaissance Pellet stoves that fall within the following serial range: -Prodigy serial # range 1001-2281 -Renaissance serial # range 1001-3607 The only previous option for the both control boards was to try to rebuild them. Now you can get a new aftermarket model with a 90 day warranty for a little more than the rebuild would have cost, and much faster. We're commited to finding the resources for parts you need to help keep your Whitfield or Waterford pellet stove working! We can also rebuild almost any pellet stove control panel and will build and stock the most popular ones as new products. Here are a few of the control panels that are discontinued from the manufacturer and can be rebuilt or have new versions made.
  • Whitfield Quest 13645900 Control Board
  • Whitfield Quest Plus 17255912 Control Board
  • Whitfield – Earth Stove 38515H Control Board for TP300 & NF2000I

Share this post



← Older Post Newer Post →